Maintenance And Cleaning; Lint Filter; Sensor - Blomberg DV 16540 Owners And Installation Manual

6

Maintenance and cleaning

Lint filter

Lint and fibers released from the laundry in to
the air during the drying cycle are collected in
the "Lint Filter".
C F
ibres and lint are formed during wearing
and washing.
A
Always clean the filter after each drying
cycle.
To clean the Filter;
1. Open loading door.
2. Remove the lint filter by pulling it up and
open the filter.
3. Clean lint, fiber, and by hand or with a soft
piece of cloth.
4. Close the filter and put it back in place.
C
You can clean the filter and filter area with a
vacuum cleaner.

Sensor

There are humidity sensors in your machine
that detect whether the laundry is dry or not.
For sensor cleaning;
1. Open loading door.
2. Allow machine to cool off if drying has been
done recently.
3. Wipe the metal sensors with a soft cloth
dampened with vinegar and dry the sensors
afterwards.
C
Clean the metal sensors at regular
intervals (4 times a year).
A
Never use solvents, cleaning agents
or similar substances when cleaning
as these might cause fire and/or an
explosion!
22 - EN