Page 1
To prevent accidents and/or machine damage, read these instructions before installation or use. Use the dryer only as instructed in this owner’s guide and installation instructions manual included with your dryer. Keep this guide for future reference Front-Loading Dryer DV 17540 NBL00 Owner’s Guide & Installation Instructions...
Please read this manual first! Dear Customer, We hope that your product, which has been manufactured in modern facilities and passed through strict quality control procedures, will give you the best results. Therefore, we advise you to read this manual thoroughly before using your product and keep it for future reference.
Overview Figure 1 Control Panel Type label Loading Door Adjustable Feet Lint Filter Specifications of this appliance may change without notice to improve the quality of the product. Drawings in this manual are schematic and may not match your product exactly. Values stated on the machine labels or in the documentation accompanying it are obtained in the laboratory in accordance with relevant standards.
Important Safety Instructions the risk of electric shock by providing WARNING: To reduce the risk of fire, a path of least resistance for electric electric shock, or personal injury when current. This appliance is equipped using this appliance, follow the basic with a cord having an equipment- precautions including the following: grounding conductor and a grounded...
Page 7
or explode. • Do not allow children to play on or • Do not use the tumble dryer if industrial in the appliance.Close supervision chemicals have been used for of children is necessary when the cleaning. appliance is used near children. •...
Installation Instructions WARNING - Risk of fire •The clothes dryer (“appliance‘) installation must be performed by a qualified installer. •Install the appliance according to the manufacturer’s instructions and local codes. •Do not install a clothes dryer with flexible 3- wire receptacle plastic venting materials.
Connect the terminal labeled N and the • Connection via extension cords or multi- Ground terminal labeled G with the supplied plugs should not be made. short cable. Tighten the terminals so that they • The main fuse/breaker and switches must securely hold the conductors.
” 36.14 (918 mm) min. 33½" (850 mm) Minimum Installation Ventilation Requirements Clearances Closet door must have 2 openings, one located 3.2 inches (8 cm) from bottom of door having a minimum area of 16 sq. inches (103 Alcove or Closet cm2) and the other one located 3 inches (7.5 Built-under...
be placed on top of a washing machine, the To connect a ventilation duct; approximate weight together may reach 397 1.Connect the air outlet metal duct to the lbs (180 kg) when they are full. Therefore, spacer by turning it counter-clockwise. the floor must be capable of carrying the load 2.Make the duct passages as shown the placed on it!
elbows to not hinder air flow. To prevent water accumulation in the duct, make sure it is not folded on the floor. In Canada only those foil-type flexible ducts, if any, specificially identified for use with the appliance by the manufacturer shallbe used. In the United States, only those foil-type flexible ducts, if any, specifically identified for use with the appliance by the manufacturer and...
Operating Instructions fabrics as well as lace curtains can be permanently wrinkled. Do not dry these in your WARNING: To reduce the risk of fire, electric shock, or personal injury, read machine! the IMPORTANT SAFETY INSTRUCTIONS •Do not dry items made of hermetic fibers such as pillows and quilts in the dryer.
Page 14
Large items (e.g. bed sheets, quilt covers, large tablecloths) may bunch-up. Stop the machine 1 or 2 times during drying process to separate any bunched-up laundry. The following weights are given as examples. Approximate Home articles weights (gr) Cotton quit covers (double) 1500 Cotton quit covers (single) 1000...
Loading door options. There are automatic sensor programs for different types of textiles and timer •Open loading door. programs. •Place laundry items loosely into the dryer. Choose the appropriate program according •Push the loading door to close. Make sure the type of textile from the table below it that no items are caught in the door.
Special programs Jean For special cases, there are also extra Shirts Delicates programs available: Mini Damp Dry Permanent Press Jean Mixed Fabric Regular Dry Shirts Delicates Refresh Damp Dry Mini Damp Dry Permanent Press Timed Programs Mixed Fabric 15 min Regular Dry Regular Dry 30 min...
ventilation program to cool it down. Starting the Program 1. Press the “Start/Pause/Cancel” button to If the dryer is stopped during any drying start the program. program, and if the position of the program 2. The Start/Pause/Cancel button will light up selector knob is changed, a tone will be heard to indicate that the program has started.
lock should be deactivated. To deactivate the childproof lock, press the same two buttons for 3 sec. Child Lock 2 beeps when activating and 1 beep when deactivating the child-proof lock will be heard. Warning indicators Filter cleaning A warning lamp will light up to remind filter cleaning after a program finishes.
Technical Specifications Enus Model Vented Dryer with electronic sensor control Height (in) 33 1/2 Witdth (in) 23 1/2 Depth (in) 21 1/4 Height adjustment of feet (in) Weight, unpacked (lbs) Voltage / Frequency 208-240V ~ 60 Hz Connected load 2000-2400 W Fuse 15 A This appliance’s packaging material is recyclable.
User maintenance and cleaning instructions Sensor Lint filter There are humidity sensors in your machine Lint and fibers released from the laundry in to that detect whether the laundry is dry or not. the air during the drying cycle are collected in For sensor cleaning;...
Troubleshooting Problem Cause Explanation / Solution * Clean the lint filter. Drying process Lint filter may not have been * Meshes of the filter may be takes too long. cleaned. clogged. Wash with water. * Make sure that the dryer is * It may not plugged in.
Need help?
Do you have a question about the DV 17540 NBL00 and is the answer not in the manual?
Questions and answers