Printing And Recording - GE B20 User Manual

Printing and recording

You need
−
Laser printer for printouts (PCL5 compatible, min. 2Mb memory)
NOTE: Network printer only.
−
Optional recorder configuration for recording
−
Thermal paper for the recorder
NOTE: Before you start printing, check that the printer is operational.
NOTE: Recordings on thermal paper may be destroyed when
exposed to light, heat, alcohol, etc. Take a photocopy for your
archives.
Direct function key
Recorder
Start or stop recording waveforms to local
recorder.
Start/Stop
Printing with a laser printer
You can print to the network connected laser printer from central
station. If the monitor connect to S/5 network, you also can print
with a laser printer from monitor directly, see following instruction.
Selecting a printer
Print/Record
1. Press the
2. Select Printer Connection.
3. Select the printer from the list.
Printing graphical trends
To print graphical trends:
Print/Record
1. Press the
2. Select Print Graphical.
3. Setup the printing settings:
• Page X: which page of the trends to be printed.
• Hours / Page: how many hours trends in one page, this is
used to setting up the resolution for printing.
• End Time: The end time for trends to be printed. The
maximum end time shall be current time.
• Trend Length: how many hours to be printed. It start from
end time to calculate back.
• Printer Connection: which printer to print to.
4. Select Print Graphs to printing. You can select Cancel Printing
to end current printing.
55
key.
key.