GE B20 User Manual page 113

Changing the units
You can use %, kPa or mmHg as the CO
units can be changed in the CO2 Setup menu:
Airway Gas
1. Press the key.
2. Select CO2 Setup - Unit.
3. Choose the option.
Selecting the source of respiration
You can select the respiration rate's source
Airway Gas
1. Press the key.
2. Select CO2 Setup - Resp Rate Source.
3. Choose the option.
NOTE: If you select AUTO, the rate is calculated from the measured
CO .
2
OFF/ON the CO measurement
2
Airway Gas
1. Press the key.
2. Select CO2 Setup - Measurement.
3. Choose OFF or ON
measurement units. The
2
Setting alarms
Setting CO alarms
2
Airway Gas
1. Press the
2. Select CO2 Setup - CO2 Alarm.
3. Select Adjust Limits to set up the limits.
4. Select EtCO2 Alarm, FiCO2 Alarm to OFF/ON the limits.
5. You can also select Alarms Setup to adjust CO
alarms.
Setting respiration rate alarms
Airway Gas
1. Press the
2. Select CO2 Setup - Resp Rate Alarm.
3. Select Adjust Limits to set up the limits.
4. Select RR Alarm, to OFF/ON the limits.
5. You can also select Alarms Setup to adjust RR or related alarms.
109
key.
or related
2
key.