GE B20 User Manual page 34

NOTE: Depending on your configuration, if the same measurement in
the waveform field that is currently in the digit field, the digit field
disappears.
Selecting Combine Pressures in the Waveform Fields menu displays
invasive pressures in the same waveform field with individual scales.
When using a 5-lead ECG cable, up to three different ECG leads can
be displayed simultaneously in different fields.
Changing digit fields
Patient numerical data is displayed in up to four digit fields, located
in the lower part of the screen. The fields are numbered from left to
right.
Each of the field can be edited or turn off. Before modifying the digit
fields remember to check that the desired parameter module is
plugged in.
Monitor Setup
1. Press the
2. Select Digit Fields and change the field contents.
NOTE: Depending on your configuration, if the same measurement in
the digit field that is currently in the waveform field, the waveform
field disappears.
If a digit field is turned OFF, the remaining digit fields are enlarged to
fill the space.
key and select Screen Setup.
30
Changing split screen
To configure the normal screen to display both real-time data and
Minitrend data, perform the following:
To select a split screen view:
Monitor Setup
1. Press the
2. Select Screen Setup.
3. Select Split Screen and choose from the options: Trend or None
Changing the minitrend length
Minitrend data can be displayed next to the parameter waveform
field in 5 or 30 minute intervals.
NOTE: 5 minute minitrends are updated every 10 seconds, and 30
minute minitrends are updated once a minute.
To modify the minitrend length:
Monitor Setup
1. Press the
2. Select Screen Setup.
3. Select Minitrend Length and choose 5 min or 30 min.
key.
key.