GE B20 User Manual page 38

Setting time and date
NOTE: If the monitor is connected to the central station, it follows the
central station's time settings and the Time and Date menu is not
available.
NOTE: You cannot change the monitor's time settings after the
patient has been admitted.
Monitor Setup
1. Press and select Time and Date
2. Turn and push the Trim Knob to set the time and date.
Battery setup
Through this menu, you can check the battery status:
Monitor Setup
1. Press the
2. Select Battery Setup. Battery information is now available.
key.
34
Changing the monitor installation settings
Changing unit
You can change units for height, weight and blood pressure.
Monitor Setup
1. Press
2. Select Install/Service and enter the password.
3. Select Installation - Units
4. Set the units for height, weight and blood pressure.
You can change temperature units through
Airway Gas
and CO units through
2
permanent.
key.
Others
- Temp Setup
- CO2 Setup. The changes are