Security Mode; Load Defaults - GE JungleMUX SONET Technical Practice

Contains ETHER-100
If the given TDM pipe is accessed by at least one ETHER-100 unit,
check the corresponding checkbox on all ETHER-1000 units accessing
that particular TDM pipe.

Security Mode

Can be set to HIGH (default) or LOW. Only an administrator can
change the security mode setting from High to Low.
In HIGH security mode, non-administrators can modify only the
configurable fields available in this tab (other than Security Mode). In
LOW security mode, this restriction is removed.

Load Defaults

Sets all unit parameters to factory defaults.
Copyright  GE Multilin Inc. 2010-2012
342-86400-498PS
Issue 1.2
April 2012
Page 81