If used, this module must be installed into 86498-94 paddleboard‟s Bank B.
RJ-45
RJ-45
RJ-45
a)
a)
NOTE: For 10/100 Base-TX port pin-designations refer to Table 4.
Figure 31: ETHER-100 Quad-Port Paddleboard Modules: (a) 86418-61 Quad
RJ-45 Module; (b) 86418-63 Quad SFP Module; (c) 86418-64 Dual RJ-45 + Dual
Pin Abbreviation
1
2
3
6
Table 4: 10/100Base-TX Port Pin Designations
Dust covers for SFP connectors should always be in place when the optical
connector is not in operation. All fiber patch cord connectors should be properly
cleaned before insertion into the unit.
necessary to remove dust from SFP connectors.
Copyright GE Multilin Inc. 2010-2012
SFP
SFP
SFP Module
10/100 Base-TX – Transmit Data (+)
TD+
10/100 Base-TX – Transmit Data (-)
TD-
10/100 Base-TX – Receive Data (+)
RD+
10/100 Base-TX – Receive Data (-)
RD-
WARNING
The radiation is infrared and invisible.
Do not attempt to look into the laser.
342-86400-498PS
Issue 1.2
April 2012
Page 56
SFP
SFP
RJ-45
RJ-45
b)
b)
Designation
Compressed air can be utilized if
c)
c)