10/100Base-Tx User-Interfaces; 1000Base-Sx/Lx User-Interfaces - GE JungleMUX SONET Technical Practice

Capacity (Data Rate):

10/100Base-TX User-Interfaces

Connector:
Cable type:
Max Cable Length:
Format:
Auto-Negotiation:
Auto-sensing (MDI/MDIX):
Received data stream polarity
auto-detection & correction:
Transmission and reception
of Link Integrity Pulses:
Port enabling/disabling:

1000Base-SX/LX User-Interfaces

Connector:
Wavelength:
System Gain:
71
Bidirectional (single-fiber) transceivers are equipped with SC connectors.
Copyright  GE Multilin Inc. 2010-2012
Up to 1000 Mbit/sec ("wire speed") in each
direction (Full Duplex)
RJ-45
(qty=4 for 86418-61; qty=2 for 86418-64)
CAT 5 UTP (or better)
100 m
Ethernet 10Base-T (Half Duplex)
Ethernet 10Base-T (Full Duplex)
Ethernet 100Base-TX (Half Duplex)
Ethernet 100Base-TX (Full Duplex)
(Compliant to IEEE 802.3 Clauses 14, 24, 25,
and 28)
Yes, for both speed and duplex mode
Yes
Yes
Yes
Yes
Optical, LC 71 (part of SFP transceiver)
1300 nm (determined by SFP transceiver
used)
>11.5 dB (for smf, 1000Base-LX, 1310 nm)
>8 dB (for mmf, 1000Base-SX, 850 nm)
342-86400-498PS
Issue 1.2
April 2012
Page 138