Fan Assembly Removal and
Installation
The fan assembly and the metal fan assembly mounting bracket are found at the end of the card
(shown in
Figure
given in the following sections.
Fan Assembly
Fan Assembly Removal
Use the following steps to remove the fan assembly. Follow the
Chapter 3: Card Installation
1. Remove mounting bracket screws. Turn over the card and remove the six screws (highlighted
in the following image) to connect the fan assembly to the fan assembly mounting bracket.
UG1531 (v1.0) March 4, 2022
VCK5000 Hardware Install Guide
6). Instructions for removing and installing the fan assembly and bracket are
Figure 6: Fan Assembly and Mounting Bracket
Metal Fan Assembly Mounting Bracket
Procedures.
Appendix A: Fan Assembly Removal and Installation
Safety Instructions
Send Feedback
Appendix A
X26358-030322
outlined in
www.xilinx.com
28