Temperature And Electrical Status - Xilinx VCK5000 Installation Manual

If the card was installed and validated successfully, a message similar to the following will be
displayed. Review the output and confirm the device validated successfully. Additional validation
details are displayed by appending the --verbose option to the command.
Starting validation for 1 devices
Platform
SC Version
Platform ID
----------------------------------------------------------------------------
---
Test 1 [0000:01:00.1]
Test Status
----------------------------------------------------------------------------
---
Test 2 [0000:01:00.1]
Test Status
----------------------------------------------------------------------------
---
Test 3 [0000:01:00.1]
Test Status
----------------------------------------------------------------------------
---
Test 4 [0000:01:00.1]
Details
MB/s
MB/s
Test Status
----------------------------------------------------------------------------
---
Test 5 [0000:01:00.1]
Details
Test Status
----------------------------------------------------------------------------
---
Test 6 [0000:01:00.1]
Details
Test Status
----------------------------------------------------------------------------
---
Test 7 [0000:01:00.1]
Validation completed. Please run the command '--verbose' option for more
details

Temperature and Electrical Status

To monitor the current electrical and temperature status, use the following commands:
xbutil examine --device <user BDF> --report thermal electrical
UG1531 (v1.0) March 4, 2022
VCK5000 Hardware Install Guide
: xilinx_vck5000_gen3x16_xdma_base_1
: 4.4.12
: 1E56042E-C345-CF41-5D66-4E9EE73451FC
: PCIE link
: [PASSED]
: SC version
: [PASSED]
: Verify kernel
: [PASSED]
: DMA
: Host -> PCIe -> FPGA write bandwidth = 10820.6
Host <- PCIe <- FPGA read bandwidth = 10513.8
: [PASSED]
: iops
: IOPS: 132544 (hello)
: [PASSED]
: Bandwidth kernel
: Maximum throughput: 50540 MB/s
: [PASSED]
: vcu
Chapter 5: Card Bring-Up and Validation
www.xilinx.com
Send Feedback
24