Shift Cable Service; Shift Lever Removal / Installation; Shift Cable Inspection - Polaris GENERAL 2016 Service Manual

Table of Contents

TRANSMISSION

SHIFT CABLE SERVICE

1. Remove the shift knob cover (A), retaining screw (B)

and shift knob (C) from the shift lever (D).

2. Remove the four push rivets retaining the upper

dash panel and remove the panel to access the shift

3. Remove the rubber grommet (E) from the dash and

shift lever (D).

4. Remove clip (F) and washer (G) retaining the shift

cable (H) to the shift lever (D). Disconnect cable end

from the lever.

5. Remove the retaining ring (J) and slide the shift lever

(D) off the mounting bracket and out from the frame.

6. Remove both bushings (K) from the shift lever and

service as needed.

7. Perform the previous steps in reverse order to

reinstall the shift lever (lever, cable, dash panel, shift

Shift cable adjustment may be necessary if symptoms

• No gear position or AWD display on instrument cluster

• Ratcheting noise on deceleration

• Inability to engage into a gear

• Excessive gear lash (noise)

• Gear selector moving out of desired range

Inspect shift cable, clevis pins, and pivot bushings and

replace if worn or damaged.

9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual

Table of Contents