Table of Contents
Advertisement
HOOD / FRONT BODY
HOOD REMOVAL
q
1. Remove two fasteners
and remove hood.
DASH REMOVAL
1. Remove front fascia. See Front Fascia Removal page
11.17.
2. Remove LH and center dash trim
e
3. Remove RH dash trim
.
9850068 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.
4. Remove eight fasteners
FRONT FENDER FLARE REMOVAL
1. Remove twelve fasteners
remove fender flare.
w
.
BODY / FRAME
r
and remove dash.
q
w
and one push pin
and
11.19
11
Advertisement
Chapters
Table of Contents
Troubleshooting
Need help?
Do you have a question about the RZR PRO XP 2020 and is the answer not in the manual?
Questions and answers
My 2020 RZR XP 4 turbo 1000 will crank but not fire after overeating . I've checked all the electrical connections , and every possible thing that is visible an nothing is faulty. I've changed the cps an still nothing . It's not throwing any codes an I'm at a loss . Please help
Possible causes for a 2020 Polaris RZR XP 4 Turbo 1000 to crank but not fire after overheating include:
- No fuel supply (fuel pump inoperative, restricted fuel lines, clogged fuel injector)
- Ignition failure (fouled spark plug, ignition component failure, weak spark)
- Low compression (high cylinder leakage, valve clearance issues)
- Fuel vapor lock (caused by overheating, preventing fuel flow)
- Restricted engine breather system (preventing proper air circulation)
- Sensor or electrical failures (failed throttle body, TPS sensor, or injector control circuit issues)
Checking fuel delivery, ignition components, and electrical connections can help diagnose the issue.
This answer is automatically generated