Dynamix™ System Features; Vehicle Speed Sensitivity; Cornering Control - Polaris RZR PRO XP 2020 Service Manual

STEERING / SUSPENSION
6. The SCM MUST be mounted with FRONT label
properly facing the front of the vehicle when installed.
Failure to do this will have an adverse effect on
vehicle handling.
7. Install the SCM on the mounting plate. Torque
mounting fasteners to specification.
TORQUE
SCM Mounting Fasteners:
8 ft-lb (11 Nm)
8. Install the harness onto the SCM. Slide the tab inward
to lock the harness to the SCM. Lightly pull on the
connector to ensure it is retained.
DYNAMIX™ SYSTEM FEATURES

VEHICLE SPEED SENSITIVITY

The system continuously monitors the speed of the vehicle and adjusts to a base level of damping for a given vehicle
speed depending on the mode selected by the user.

CORNERING CONTROL

The system continuously monitors steering angle, lateral
acceleration, and vehicle yaw rate to provide enhanced
cornering control, reducing body motion for maximum
performance.
9.70
9. Install the SCM / mounting plate assembly into the
vehicle. Torque mounting fasteners to specification.
IMPORTANT
A sticker with an arrow on the SCM indicates which side
MUST face the front of the vehicle.
TORQUE
SCM Mounting Plate Fasteners:
8 ft-lb (11 Nm)
10. Install the instrument panel cover. Torque fasteners to
specification.
TORQUE
Instrument Panel Cover Fasteners:
8 ft-lb (11 Nm)
9850068 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.