Polaris RZR PRO XP 2020 Service Manual page 240

ENGINE / COOLING SYSTEM
f
21. Lubricate the rack
lithium grease.
22. Remove the spring retainer bolt and push the adjuster
all the way in.
23. Using a new gasket, install the cam chain tensioner
g
into the cylinder and torque mounting bolts
specification.
TORQUE
Cam Chain Tensioner:
7 ft-lb (10 Nm)
24. Install the tensioner spring
l
retainer bolt . Torque retainer bolt to specification.
TORQUE
Tensioner Spring Retainer:
12 ft-lb (16 Nm)
NOTICE
The tensioner will automatically adjust to the proper
tension once the spring and retainer are installed. No
further adjustment is required.
3.96
on the tensioner with white
h
j k
, washer , and
25. Torque the camshaft carriers bolts in sequence to
specification.
to
26. Rotate crankshaft through two revolutions and verify
camshaft timing is correct.
9850068 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
TORQUE
Camshaft Carrier Bolts:
7 ft-lb (10 Nm)
© Copyright Polaris Industries Inc.