Cam Chain Tensioner Service - Polaris RZR PRO XP 2020 Service Manual

ENGINE / COOLING SYSTEM

CAM CHAIN TENSIONER SERVICE

REMOVAL
1. Remove the two fasteners
w
tensioner and the tensioner gasket
INSTALLATION
q
1. Lubricate the rack
lithium grease.
2. Remove the spring retainer bolt
adjuster all the way in.
3.52
q
securing the cam chain
e
.
on the tensioner with white
w
and push the
3. Using a new gasket, install the cam chain tensioner
y
into the cylinder and torque mounting bolts
specification.
TORQUE
Cam Chain Tensioner:
7 ft-lb (10 Nm)
4. Install the tensioner spring
w
retainer bolt . Torque retainer bolt to specification.
TORQUE
Tensioner Spring Retainer:
12 ft-lb (16 Nm)
NOTICE
The tensioner will automatically adjust to the proper
tension once the spring and retainer are installed. No
further adjustment is required.
9850068 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
t
to
g e
, washer , and
© Copyright Polaris Industries Inc.