ENGINE / COOLING SYSTEM
3. Remove the two bolts retaining the fixed cam chain
t
guide
and remove the assembly from the engine.
4. Remove the remaining two bolts that retain the front
y
camshaft carrier
and carefully lift the carrier off the
camshafts.
u
5. Hold camshafts
with an open-end wrench , and
i
remove the top bolt
6. Rotate the engine to allow access to the remaining
bolt on each camshaft sprocket.
3.54
from each camshaft sprocket.
7. Remove the remaining bolt from each camshaft
sprocket.
8. Lift the chain and sprockets off the camshafts to allow
each sprocket to be removed.
9. Using a paperclip or other tool, hold cam chain up.
NOTICE
The crankcase has a built-in lower guide to prevent the
chain from falling off the crankshaft.
10. Evenly loosen the four bolts retaining each rear
o
camshaft carrier
and carefully lift the carriers off
the camshafts.
a
11. Mark the intake
and exhaust
ensure proper assembly.
12. Carefully remove camshafts from the cylinder head.
CAMSHAFT SPROCKET INSPECTION
Inspect cam sprocket teeth for wear or damage
Replace timing chain and sprockets if worn or damaged.
9850068 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
s
camshafts to
q
.
© Copyright Polaris Industries Inc.