T/H Sensor - Huawei FusionDC1000A Manual

FusionDC1000A Prefabricated All-in-One Data
Center
Product Description (IT Scenario)
Indica
tor

6.7 T/H Sensor

Figure 6-13 Appearance
The T/H sensor uses an RJ45 connector.
Figure 6-14 Pins of an RJ45 connector
Table 6-28 RJ45 port pin definitions
Pin
Pin1 or Pin 4
Pin2 or Pin 5
Issue 01 (2021-04-20)
Col Name
or
NO TE
The appearance of the T/H sensor depends on the onsite delivery.
Copyright © Huawei Technologies Co., Ltd.
Status Description
Blinking at A network is set up, and node
super short access is allowed (the indicator
intervals blinks at 10 Hz, on for 0.05s
and then off for 0.05s).
Blinking The AC actuator is searching for
intermittently a network (the indicator blinks
at super at super short intervals for 0.5s
short and then turns off for 0.5s).
intervals
Description
A
B
6 Management System
86