Huawei FusionDC1000A Manual page 60

FusionDC1000A Prefabricated All-in-One Data
Center
Product Description (IT Scenario)
Figure 5-10 Components
(1) External signal port
(4) Drive
(7) Compressor
(10) Refrigerant liquid pipe
(13) Water pan cover
●
●
●
●
●
Issue 01 (2021-04-20)
Compressor
The smart cooling product uses a DC variable-frequency compressor that
features compact size, light weight, a long service life, low noise, easy
installation, high reliability, stability, and energy efficiency.
Oil separator
Separates the lubricant brought out due to discharge of the compressor and
brings back the separated lubricant to the compressor.
Fan
The energy-efficient EC fan that supports stepless speed adjustment is used to
reduce the fan energy consumption. A single fan is light and easy to maintain.
If a single fan fails, the entire system does not shut down.
Evaporator
The finned-tube evaporator with a high cooling efficiency adopts the synergy
field principle and computational fluid dynamics (CFD) to optimize the flow
path design, which greatly improves the heat exchange efficiency.
Electronic expansion valve (EEV)
Copyright © Huawei Technologies Co., Ltd.
(2) Electric control box
(5) Wet film humidifier
(8) Drainpipe
(11) Air filter
(14) Water pump
5 Cooling System
(3) Module subrack
(6) Differential pressure switch
(9) Refrigerant gas pipe
(12) Fan
(15) Transformer (NetCol5000-
A025HNWE2)
53