Huawei FusionDC1000A Manual page 76

FusionDC1000A Prefabricated All-in-One Data
Center
Product Description (IT Scenario)
Item
RS485 serial
port
expansion
POE
expansion
AIDI
expansion
(RJ45)
DO expansion
(RJ45)
Fault isolation
Wireless
communicatio
n
4G
Issue 01 (2021-04-20)
Specifications
● Output voltage: 13–15 V DC (rated voltage: 14.5 V DC)
● Supports four RS485 ports with the default communications
rate of 9600 bit/s.
● COM1–COM3 ports provide 12 V DC power.
● The power supply can be switched on or off and is on by
default.
Supports two POE (GE) ports for expansion of the POE bus,
and supports network isolation and ring network.
● Output voltage: 13–15 V DC (rated voltage: 14.5 V DC)
● Provides five universal AIDI ports for connecting to sensors
such as smoke sensors, water sensors, and NTC sensors.
AIDI_1 to AIDI_3 are full-function AIDI ports, and AIDI_4 to
AIDI_5 are simplified AIDI ports without type identification.
● The power supply can be switched on or off and is on by
default.
● Output voltage: 13–15 V DC (rated voltage: 14.5 V DC)
● One DO port. Supports active DO.
● The power supply can be switched on or off and is on by
default.
There are three groups of 12 V ports. A group has a maximum
current of 660 mA, a route has a maximum current of 800 mA,
and the maximum total current is 2 A.
Group 1: 12 V of the AIDI_1 and DO/12V ports
Group 2: 12 V of the AIDI_2, COM1/AIDI_4, and COM3/12V
ports
Group 3: 12 V of the AIDI_3 and COM2/AIDI_5 ports
Supports wireless communication that complies with
IEEE802.15.4.
Supports the 4G module. The ECC800-Pro supports short
message service (SMS) message sending and 4G
communication, is compatible with 3G (WCDMA)
communication, and provides a standard SIM card slot.
NOTE
The prerequisite for using a SIM card is that the site has signal
coverage.
Copyright © Huawei Technologies Co., Ltd.
6 Management System
69