Power Module - Huawei FusionDC1000A Manual

FusionDC1000A Prefabricated All-in-One Data
Center
Product Description (IT Scenario)
SW Button
Table 6-16 SW button description
Function
Description
Wireless
network RF_Z
(802.15.4)
pairing
Turning on
WLAN
Restoring the
default IP
address, factory
settings, and
user information

6.2.3 Power Module

Indicator
Table 6-17 PSU indicator description
Indicator
Issue 01 (2021-04-20)
Operation Description
In non-wireless network (802.15.4)
pairing mode, press and hold down
the button for 3s to 5s to enter the
wireless network pairing mode.
In wireless network (802.15.4)
pairing mode, press and hold down
the button for 3s to 5s to exit the
pairing mode; or the system
automatically exits the pairing mode
after 30 minutes without pressing
the button.
Press and hold down the button for
more than 8s to 20s to clear
network parameters.
Press the button for less than 3s to
turn on the WLAN service.
Hold down for 1 minute
Colo Name
r
Gree Power
n indicator
Copyright © Huawei Technologies Co., Ltd.
Status Description
Steady on The converter has a power
input.
Off The converter has no power
input or is faulty.
Blinking at The converter is being queried
long intervals (the indicator blinks at 0.5 Hz,
on for 1s and then off for 1s).
6 Management System
Indicator Status
The RF_Z indicator is
blinking at super
short intervals.
The RF_Z indicator is
blinking at long
intervals.
The RF_Z indicator is
blinking at super
short intervals.
None
None
75