Table of Contents
Advertisement
RRU3203
Installation Guide
2.1 Reference Documents
Before the installation, you must be familiar with reference documents.
The following reference documents are required during RRU installation:
l
l
l
This document describes the RRU installation on a pole, U-steel, angle steel, or wall. If RRUs
are installed on the IFS06, the following reference document is required:
l
2.2 Tools and Instruments
All tools and instruments required for RRU installation must be ready before the installation.
Hammer drill (a φ 14 bit)
Heat gun
Rubber mallet
Utility knife
Issue 06 (2012-04-16)
RRU3203 Hardware Description
DBS3900 Installation Guide
OCB User Guide
DBS3900 (ICR) Installation Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ESD gloves
Phillips screwdriver (M3 to
M6)
COAX crimping tool
Cable cutter
2 Installation Preparations
Vacuum cleaner
Flat-head screwdriver (M3 to
M6)
Wire stripper
Adjustable wrench (capacity
≥ 32 mm [1.26 in.])
5
Advertisement
Table of Contents
