Table of Contents
Advertisement
RRU3203
Installation Guide
Tighten the two dual-nut bolt assemblies alternatively. After the main and auxiliary brackets are
secured properly, measure the spacing between the brackets on both sides and ensure that the
spacing is the same on the two sides.
Figure 7-31 Securing the bracket assembly onto angle steel
Step 5 Install the RRU on the main mounting bracket until the RRU snaps shut, as shown in
7-32.
Figure 7-32 Installing the RRU on the main mounting bracket
----End
Issue 06 (2012-04-16)
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Installing the RRU
Figure
55
Advertisement
Table of Contents
