Advertisement
Lynx Smart Satellite Sensor Kit
Installation and User Guide
The Lynx Smart Satellite Sensor (LSSS) Kit receives data
from flow, temperature, and pressure sensors, as well as
switches and rain buckets. The data is stored in the satellite
and relayed to the Lynx computer. User-defined alarms
and responses can be configured in Lynx when operating
in Central Mode, or locally when in Local Mode.
•
Sensor data is stored in the satellite for 12 hours and
transmitted back to Lynx every 2 hours.
•
Current sensor information and alarm status can be
viewed in the satellite's faceplate.
•
Central-based or stand-alone alarm responses can be
configured for any sensor input.
•
When alarms are configured, Lynx will monitor the
sensor-kit equipped satellite at the polling interval. The
Sensor Dashboard Utility will monitor sensor status
every 15 seconds.
Sensor Input Board Overview
Power Connector
24VAC LED
Indicates board is receiving
24VAC from satellite.
17V LED
Indicates 17V is active.
Transmit LED
Indicates data packet
is being sent.
Temperature Probe LED
Indicates if a temperature
sensor probe is present.
IN1 LED - Pressure
Indicates if a pressure sensor
is present.
A handful of satellites will need a firmware update
to take advantage of the Lynx Smart Satellite Sensor
Kit. Please see p. 7 for firmware version instructions.
Table of Contents
1. Board Overview
2. Board Prep
3. Board Installation
4. Sensor Installation
5. Sensor Configuration
(Local Mode)
6. Sensor Configuration
(with Lynx)
7. Warranty & Support
Page
Kit
Components
1
2
• Sensor Input
2
Board
3
• Surge Board
4
• Mounting
hardware
8
• Fuse
10
• Labels
5V LED
Indicates 5V is active.
12V Sensors LED
Indicates if a 12V sensor
is present.
12V Stations LED
Indicates 12V is active.
Temperature Probe Connector
Connector for temperature
sensor probe.
IN2-IN6 LEDs
Indicate sensor activity
for channels IN2-IN6.
1
Advertisement
