Advertisement
7. Select the desired sensor from the dropdown list.
Enter the various limits and Qualification times
(Figure 3). For an explanation of these terms, please
see the Sensor Configuration section above.
Checking the Use Local Response checkbox turns
on a switch in the satellite containing the sensor
board for a timed duration.
Reviewing Sensor Data
It is possible to review sensor information in realtime or
historically.
Realtime:
Click Utilities then Sensor Dashboard. Select the Sensor
Input Board to monitor. You will see a screen similar to
Figure 4, though the number and type of sensors might
be different, as well as the ranges for the sensors.
Historic:
Click Report Generator then Sensors. Select the desired
sensor, the date range, and whether to view the sensor data
as a table (Figure 5) or graph (Figure 6).
Figure 4
Figure 5
Figure 6
9
Advertisement
