Advertisement
The Toro Promise - Limited One-Year Warranty
The sensor input board is covered by this warranty for a period
of one year from the date of installation.
Neither Toro nor Toro Warranty Company is liable for indirect,
incidental or consequential damages in connection with the
use of equipment, including but not limited to: vegetation loss,
the cost of substitute equipment or services required during
periods of malfunction or resulting non-use, property damage
or personal injury resulting from installer's actions, whether
negligent or otherwise. Some states do not allow the exclusion
Electromagnetic Compatibility
This device complies with FCC rules Part 15. Operation is
subject to the following two conditions: (1) This device may
not cause harmful interference and (2) this device must accept
any interference that may be received, including interference
that may cause undesirable operation. This equipment generates
and uses radio frequency energy and if not installed and used
properly, that is, in strict accordance with the manufacturer's
instruction, may cause interference to radio and television
reception. It has been type tested and found to comply with
the limits for a FCC Class B computing device in accordance
with the specification in subpart J of Part 15 of FCC Rules,
which are designed to provide reasonable protection against
such interference in a residential installation. However, there is
no guarantee that the interference will not occur in a particular
installation.
© 2020 The Toro Company • Irrigation Division • www.toro.com
10
of incidental or consequential damages, so the above exclusion
may not apply to you.
All implied warranties, including those if merchantability and
fitness for use, are limited to the duration of this express
warranty. Some states do not allow limitations on how long an
implied warranty lasts, so the above limitation may not apply to
you. This warranty gives you specific legal rights and you may
have other rights which vary from state to state.
If this equipment does cause interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
(4) Consult the dealer or an experienced radio or television
technician for assistance. The user may find the following booklet
prepared by the Federal Communications Commission helpful:
"How to identify and Resolve Radio-TV Interference Problems".
This booklet is available from the U.S. Government Printing
Office, Washington, DC 20402. Stock No. 004-00345-4m.
Part Number 373-0918 Rev. F
Advertisement
