Section 2
Power Cable
2.1
Connecting the Power Cable
To connect the TSL3000E/TSL3100E power cable, use the attached connector.
Robot controller side
Plug connector model: JL04V-6A18-10SE-EB
Cable:
The cable is not included in the accessories. The attached plug connector
connected to the ACIN of the controller is soldering type. The customer must use
the attached connector to fabricate the cable.
Power supply
Power capacity
Instantaneous power failure
Be sure to ground the PE ground terminal to prevent electric shock.
AC IN
R
A
S
B
C
PE
D
Fig. 2.1 Connection of power cable
Manufacturer: JAE (Japan Aviation Electronics Industry,
Limited)
JL04-18CK(13)
Manufacturer: JAE (Japan Aviation Electronics Industry,
Limited)
2
2.0 mm
(AWG#14)
Table 2.1 Power Supply Specifications
Ground
User side
L1
Single-phase
190-240 VAC
L2
FG
Single-phase 190-240 V AC
50/60 Hz 1 Hz
Varies depending on the robot to
be connected.
40 msec or less
Class D dedicated grounding
– 16 –
INTERFACE MANUAL
50/60 Hz
STE 85457