ABB SM1000 User Manual page 23

Videographic Recorders
SM1000 and SM2000
Enter a valid FTP username –
see Section 3
Enter an associated FTP password
Enter an Operator Message to be sent
to the recorder (maximum 20 characters)
Enter an Instruction to be sent to the
Operator (maximum 160 characters)
Assign an Operator Message to a specific
group or groups
Click on button to send the Message or
Instruction.
An Operator Message is stored in the
recorder's alarm event log and if
enabled, it is displayed in the chart view
An Instruction is displayed in a message
box on the recorder's screen until the
Operator acknowledges it by pressing
the
Fig. 5.8 Operator Message Page
Instrument identification
Software revision and options
Hardware fitted
Fig. 5.9 Service Information Page
IM/SMENET Issue 4
OR
key
5 Operation
21