Operation; Web Server - ABB SM1000 User Manual

Videographic Recorders
SM1000 and SM2000

5 Operation

5.1 Web Server – Figs 5.1 to 5.9
Figs. 5.1 to 5.9 are examples of the page views available from the instrument's web server.
IP address of
instrument
Instrument tag
Menu buttons to
display current
instrument data
and states
Change
configuration
(a warning
message is
displayed if not
logged on) – see
below
Note 1
Language
selection for web
pages
Fig. 5.1 Home Page
Note.
1. The 'Log On' and 'Configuration' buttons are displayed only if a user has been configured for remote operation access –
see Section 3.1, page 5.
2. The Current Display view is not available if the recorder is in historical review or configuration mode.
IM/SMENET Issue 4
If enabled, the screen image
is updated every 10 seconds
Drop-down selection box of
views available.
The instrument's display
changes to the view selected
Note. The screen image may
take a number of seconds to
update
5 Operation
Click to log on to
the recorder to
enable
configuration
access – see
below
Note 1
'Show Complete
Log' hyperlink
shown if one of
the log views is
displayed.
Clicking on this
causes the entire
log to be
displayed in the
browser window
Screen image
showing the
current display on
the instrument's
screen
Note. The screen
image is not
displayed if the
instrument is in
historical review or
Configuration
Mode
17