ABB ACSM1 Control Panel User Manual page 40

40
Trying to load a user set between different firmware versions
If you try load a user set between different firmware versions, the panel shows you
the following fault information:
Step Action
1. Go to the Parameters option by selecting PARAMETERS on the main menu as
shown in section
A user set is loaded through parameter 16.09 USER SET SEL. Select
parameter group 16 SYSTEM with keys
SEL
2. Press to select the parameter group 16. Select parameter 16.09 USER
SET SEL with keys
shown below its name.
EDIT
3. Press .
Select the user set you want to load with keys
SAVE
Press .
4. Panel shows a text identifying the fault.
Operation
Parameters on page 24.
and . Current value of each parameter is
and .
and .
Display
LOC PAR GROUPS
11 START/STOP MODE
12 DIGITAL IO
13 ANALOGUE INPUTS
15 ANALOGUE OUTPUTS
16 SYSTEM
EXIT 00:00 SEL
LOC PARAMETERS
1603 PASS CODE9901
1604 PARAM RESTORE
1607 PARAM SAVE
1609 USER SET SEL
No request
EXIT 00:00 EDIT
LOC PAR EDIT
1609 USER SET SEL
No request
[1]
CANCEL SAVE
00:00
LOC PAR EDIT
1609 USER SET SEL
Load set 1
[2]
CANCEL 00:00 SAVE
LOC FAULT
FAULT 310
USERSET LOAD
RESET EXIT
16