ABB ACSM1 Control Panel User Manual page 38

38
Step Action
4. The panel shows a list of erroneous parameters.
You can scroll the parameters with keys
parameter error is also shown.
5. You can edit parameters by pressing
Parameter 60.05 POS UNIT is used as an example.
Edit the parameter as shown in section
SAVE
6. Press to save the new value.
CANCEL
Press to return to the list of erroneous parameters.
7. The parameter value you chose is visible under the parameter name.
READY
Press when you have edited parameters.
Trying to restore a user set between different firmware versions
If you try to backup and restore a user set between different firmware versions, the
panel shows you the following alarm information:
Step Action
1. Restore operation starts normally.
2. Version check is also OK.
You can see on the panel that the firmware versions are not the same.
You can scroll the text with keys
Operation
and . The reason for
EDIT
when EDIT command is visible.
Parameters on page 24.
and .
Display
LOC PAR ERRORS
6005*POS UNIT
0
?
VALUE MISSING
6008*POS2 INT SCALE
READY 00:00 EDIT
LOC PAR ERRORS
22114*
1313*AI SUPERVIS ACT
0000 bin
INCORRECT VALUE TYPE
00:00
READY EDIT
LOC PAR EDIT
6005 POS UNIT
Revolution
[0]
CANCEL 00:00 SAVE
LOC PAR EDIT
6005 POS UNIT
Degree
[1]
CANCEL 00:00 SAVE
LOC
PAR ERRORS
6005*POS UNIT
1
?
VALUE MISSING
6008*POS2 INT SCALE
00:00
READY EDIT
Display
LOC PAR BACKUP
Initializing param.
restore operation
00:00
LOC VER CHECK
FIRMWARE VERSION
UMFI, 1460, 0,
UMFI, 1330, 0,
OK
PRODUCT VARIANT
00:00
CANCEL CONT
LOC VER CHECK
FIRMWARE VERSION
PRODUCT VARIANT
2
2
OK
CANCEL 00:00 CONT
1
4
1
1
2