Help And Panel Version - Any Mode; How To Get Help; How To Find Out The Panel Version - ABB ACSM1 Control Panel User Manual

Help and panel version – Any mode

How to get help

Step Action
1. Press to read the context-sensitive help text for the item that is highlighted.
?
If help text exists for the item, it is shown on the display.
2. If the whole text is not visible, scroll the lines with keys
3. After reading the text, return to the previous display by pressing

How to find out the panel version

Step Action
1. If the power is switched on, switch it off.
- If the panel cable can be disconnected easily, unplug the panel cable from the
control panel, OR
- if the panel cable can not be disconnected easily, switch off the control board
or the drive.
2. Keep key
?
information. The display shows the following panel information:
Panel SW: panel firmware version
ROM CRC: panel ROM check sum
Flash Rev: flash content version
Flash content comment.
When you release the
pressed down while you switch on the power and read the
key, the panel goes to the Output mode.
?
LOC
TIME FORMAT
DATE FORMAT
SET TIME
SET DATE
DAYLIGHT SAVING
EXIT
LOC
Use daylight saving
to enable or disable
automatic clock
adjustment according
to daylight saving
EXIT
and .
LOC
to enable or disable
automatic clock
adjustment according
to daylight saving
changes
EXIT
EXIT
.
LOC
TIME FORMAT
DATE FORMAT
SET TIME
SET DATE
DAYLIGHT SAVING
EXIT
PANEL VERSION INFO
Panel SW:
ROM CRC:
Flash Rev:
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
19
Display
TIME & DATE 6
00:00 SEL
HELP
00:00
HELP
00:00
TIME & DATE 6
00:00 SEL
Display
x.xx
xxxxxxxxxx
x.xx
Operation