ABB ACSM1 Control Panel User Manual page 28

28
Step Action
7. Specify a new parameter group for the bit pointer parameter to point to with
keys and
8. • To continue, press
• To cancel the new value and keep the original, press
Specify a new parameter for the bit pointer parameter to point to with keys
and
9. • To continue, press
• To cancel the new value and keep the original, press
Specify a new bit for the bit pointer parameter to point to with keys
. The bit number and name (if defined) change respectively. Here bit 00
stands for bit number 2
10. • To save the new value for the bit pointer parameter, press
• To cancel the new value and keep the original, press
The new value is shown in the parameters list.
Operation
. The parameter group changes respectively.
NEXT
.
. The parameter name changes respectively.
NEXT
.
0
= 1, the first bit from the right in a 32-bit signal.
CANCEL
.
CANCEL
.
and
SAVE
.
CANCEL
.
Display
LOC PAR EDIT
1204 DI01 OUT PTR
P.06.01.00
06 DRIVE STATUS
CANCEL 00:00 NEXT
LOC PAR EDIT
1204 DI01 OUT PTR
P.06.01.00
0601 STATUS WORD 1
CANCEL 00:00 NEXT
LOC PAR EDIT
1204 DI01 OUT PTR
P.06.01.00
00 READY
CANCEL 00:00 SAVE
LOC PARAMETERS
1201 DI01 CONF9901
1202 DI02 CONF
1203 DI03 CONF
1204 DI01 OUT PTR
P.06.01.00
EXIT 00:00 EDIT