Drive System Maintenance; Checking The Tire Pressure; Replacing The Castor Wheels And Bearings - Toro 30363N Operator's Manual

Hide thumbs Also See for 30363N:
Table of Contents

Advertisement

Figure 49
1. Side panel cover
Figure 50
2. Latches
Drive System
Maintenance

Checking the Tire Pressure

Service Interval: Every 50 hours
Check the pressure after every 50 operating hours or
monthly, whichever occurs first (Figure 51).
Maintain the air pressure in the front and rear tires. The
correct air pressure is 15 psi (103 kPa) in the rear tires
and 25 psi (172 kPa) in the caster wheels. Uneven tire
pressure can cause uneven cut. Check the tires when
they are cold to get the most accurate pressure reading.
Replacing the Castor Wheels
and Bearings
1. Obtain a new caster wheel assembly, cone bearings,
and bearing seals for your Authorized Toro
Distributor.
2. Remove the locknut from the bolt holding the castor
wheel assembly between the castor fork (Figure 52).
45
Figure 51

Advertisement

Table of Contents
loading

This manual is also suitable for:

30464n30465n30468nGroundsmaster 7200Groundsmaster 7210

Table of Contents