Table of Contents
Advertisement
Figure 90
Front Axle
1. Front-axle housing
2. Oil-servicing equipment
3. Fill plug
4. Pinion housing
5. Sight port
1. Rear-axle housing
2. Forward
3. Oil-servicing equipment
6. Fill the axles with the specified oil through the sight
port until the oil is level with the threads at the bottom
of the port
(Figure 90
7. Wait a few minutes for the oil to settle, then add more
oil as necessary.
Note: Continue to add oil until the oil level stabilizes
and is at the bottom of the threads of the sight port.
8. Install the fill plugs into the sight ports of the pinion
housings for the axles
Cleaning the Axle Breathers
Service Interval: Every 1,000 hours
1. Clean the area around the breathers with a cleaning
solvent
(Figure 92
61
1. Breather fitting
Figure 91
Rear Axle
4. Fill plug
5. Sight port
and
Figure
91).
(Figure 90
and
Figure
91).
and
Figure
93).
Figure 92
2. Front axle
Advertisement
Table of Contents
