Toro 25450 Operator's Manual page 31

Figure 34
1. Engine information
2. Trencher (traction unit)
setup
3. Screen setup
4. Trencher (traction unit)
diagnostics
Accessing the Engine Information Screen
To access the engine-information screen, press button
number 1 on the main-selection screen; refer to
Main-Selection Screen (page
This screen displays measurements for the following
engine-operating parameters:
•
Engine speed in rpm
•
Engine load percentage
•
Engine hours (Figure
•
Oil pressure and boost pressure
•
Engine coolant and intake temperature
•
Voltage (Figure 35)
•
Amount of fuel used
5. Trencher (traction unit)
errors
6. Up arrow and down arrow
buttons
7. Engine errors
Accessing the
30).
(Figure 35)
(Figure 35)
35)
(Figure 35)
(Figure
(Figure 35)
1. Return to the previous screen
Accessing the Trencher Setup Function Screen
You will need a PIN to access this screen; to obtain the PIN,
contact an Authorized Toro Distributor.
Accessing the Screen Setup Function Screen
To access the screen setup function, press button number
3 on the main-selection screen; refer to
Main-Selection Screen (page
This screen allows the user to increase or decrease the
brightness of the monitor by pressing the following:
•
Button 5—Increase the display brightness
•
Button 6—Decrease the display brightness
35)
31
Figure 35
Accessing the
30).
(Figure
(Figure
36)
36)