Drive System Maintenance; Servicing The Tires - Toro 25450 Operator's Manual

Traction unit
Hide thumbs Also See for 25450:
Table of Contents

Advertisement

Figure 81
1. Hex-flanged bolts (5/16 x
3/4 inch)
2. Cover
3. Console
4. Locate the open fuse and replace it with a fuse of the
same type and amperage
5. Check that the new electrical components function.
6. Align the hole in the cover with the nut clips on the
flanges of the console
7. Secure the cover to the console with the 4 hex-flanged
bolts that you removed in step 3.
8. Rotate the battery-disconnect switch clockwise to the
On position
(Figure
9. Install the left and right side panel; refer to
the Side Panels (page
4. Fuse block
5. Fuses
(Figure
81).
(Figure
81).
80).
Installing
46).
Drive System
Maintenance

Servicing the Tires

WARNING
Exploding tires and/or rim parts can cause injury
or death.
Keep yourself and others out of the area of danger.
Stand on the tread side of the tire. Always fill
the tires to the correct air pressure, and follow
the instructions in this manual for adding air or
servicing the tires.
WARNING
Do not weld the wheel or rim with the tire installed.
Welding with an explosive air/gas mixture can
ignite, causing serious injury or death, regardless of
whether the tire is inflated or deflated.
Removing the air or breaking the bead is not
adequate; you must completely remove the tire from
the rim before welding.
WARNING
An explosive separation of the tire and/or rim parts
can cause injury or death.
Have a qualified tire mechanic service the tire.
Checking the Tires and Wheels
Service Interval: Before each use or daily
1. Check each tire for embedded objects, separated plies,
missing tread, bulges, or a damaged bead, and replace
it, if necessary.
2. Check each wheel for signs of unusual bending or
damage, and replace it, if necessary.
Maintaining the Air Pressure in the
Tires
Service Interval: Every 50 hours
Important: Maintain the air pressure in the tires at 310
kPa (45 psi).
1. Measure the air pressure in the tires; if the tire pressure
is not at the recommended pressure, complete the rest
of this procedure.
Important: Use an air hose with a remote shutoff
valve and a self-locking chuck.
56

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rt1200

Table of Contents