Huawei FusionModule1000A40 Product Description page 70

FusionModule1000A40 Prefabricated All-in-One
Data Center
Product Description (Advanced Configuration, 208
V)
Item
DO/DI port
RS485 serial
port
expansion
Wiegand port
BLINK button
Address DIP
switch
E-label
Indicators
Table 3-48 Access actuator indicators
Indicator
PWR
Issue 03 (2021-02-10)
Specifications
● One 12 V DC power output that controls magnetic locks,
terminal
● One DI input port for connecting to the door status switch
Two RS485 ports (one route) with the default communication
rate of 9600 bit/s, physical port cascading supported (reserved
function)
Two Wiegand ports, 12 V DC card reader operating power
output; two routes of card readers can operate at the same
time.
● Press the button for less than 1 second to start blinking.
● Hold down the button for 1–5 seconds to search for a
network and start networking.
● Hold down the button for more than 10 seconds to clear
network parameters.
4-pin address DIP switch
Supported
Color Name
Green Power input
status
indicator
Copyright © Huawei Technologies Co., Ltd.
Status
● Steady on: The power input is normal.
● Off: There is no power input.
3 Architecture
64