Huawei FusionModule1000A40 Product Description page 60

FusionModule1000A40 Prefabricated All-in-One
Data Center
Product Description (Advanced Configuration, 208
V)
Indicators
Table 3-34 Indicators on the ECC800-Pro main control module
Indicato Color
r
RUN Green
ALM Red
RF_Z Green
SW Button
Table 3-35 SW button description
Function
Description
Wireless network
RF_Z (802.15.4)
pairing
Issue 03 (2021-02-10)
Name
Running status
indicator
Alarm indicator
Communication
status indicator
Operation Description
In non-wireless network (802.15.4) pairing
mode, press and hold down the button for 3s
to 5s to enter the wireless network pairing
mode.
Copyright © Huawei Technologies Co., Ltd.
Status Description
Steady on The power supply is normal, the
program is being loaded.
Off The power supply is abnormal.
Blinking at The software runs properly (the
long intervals indicator blinks at 0.5 Hz, on for 1s
and then off for 1s) or the ECC800-
Pro registers with the NetEco
successfully.
Blinking at The ECC800-Pro does not register
short with the NetEco (the indicator
intervals blinks at 5 Hz, on for 0.125s and
then off for 0.125s).
Steady on A system failure alarm is
generated.
Off The system is normal.
Blinking at A network is set up, and no node
long intervals access is allowed (the indicator
blinks at 0.5 Hz, on for 1s and then
off for 1s).
Blinking at A network is set up, and node
super short access is allowed (the indicator
intervals blinks at 10 Hz, on for 0.05s and
then off for 0.05s).
3 Architecture
Indicator Status
The RF_Z indicator is
blinking at super short
intervals.
54