FusionModule1000A40 Prefabricated All-in-One
Data Center
Product Description (Advanced Configuration, 208
V)
3.4 Management System
3.4.1 Overview
Figure 3-36 Monitoring network diagram
● Common card readers are configured for the access control system by default, and they
● The camera uses an SD card with a capacity of 64 GB for storage by default, and
● If the system has not VCN scenario, connect the interior camera and the external
● If the system has VCN scenario, connect the interior camera and the external camera
The management system contains the management hardware ECC800 and
management software NetEco.
Video surveillance devices outside the module can be connected to the ECC800.
Table 3-20 Management system configurations
Function
Client
authorization
Work order
management
Issue 03 (2021-02-10)
NO TE
should be used at an ambient temperature ranging from –40°C to +85°C. Customized
three-in-one fingerprint and card readers with keypads are also supported, and they
should be used at an ambient temperature ranging from –10°C to +55°C. The three-in-
one card readers cannot be used outdoors when the ambient temperature is below –
10°C or exceeds 55°C.
supports 7x24 recording at 720P/512K. A video management device (VCN) should be
configured if there is a need of longer-time storage, management, and configuration of
external cameras.
camera signal cables to the POE port of the smart ETH gateway.
signal cables to the LAN switch.
ECC800
16 PCS
No
Copyright © Huawei Technologies Co., Ltd.
NetEco
One license manages up to 25 smart nodes.
Yes
3 Architecture
43