Choosing Multi-Format After The Exposure - Canon CXDI-1 Operation Manual

5

5.4.2 Choosing Multi-Format after the Exposure

The method for changing the print setting after the exposure is described below.
1
2
Display the print preview.
Touch [MULTI VIEW].
The figure below shows an example in which a 14×17 portrait image has been made into a
4-image exposure using the 2x1 multi-format. On the print preview screen of this example,
the images for output numbers 1 and 2 are cut off and assigned to a single film.
In addition, a preview of the output number 3 and 4 images can be displayed by touching
below the print preview.
3-image layout
If the 2x2 multi-format is selected for a three-image layout, the third image is located
in the center of the second row.
Display the preview image screen or the CALL IMAGES screen.
Display the preview image screen (→ page 35) or the CALL IMAGES screen
(→ page 59).
Open the print setting window.
Touch [PRINT SETTING].
5. Viewing Multiple Images (Multi-View Screen)
Multi-Format
– 49 –
Continued on the following page >>