Image Output - Canon CXDI-1 Operation Manual

11.5 Image Output

The image cannot be output to the printer, etc.
Q5-1
In some cases, it is difficult to determine the cause. Check the following items:
1. Check the image output status in the Process Viewer.
It takes time when there are many images waiting to be output.
If you are in a hurry, touch [MODIFY] to display the CHANGE DESTINATION window, and then
touch [Priority] to set to Priority Output. (→ page 31)
A5-1
2. Check that the output destination is selected. (→ Setup Guide)
If exposure finishes with nothing selected, no image is output. In this case, after the output destination
is selected, the image in the Study List (→ page 53) can be loaded and output.
3. Check that there is no problem with the printer, etc. where the image is going to be output.
4. Check that there is no problem in the network.
Part of the printed image was missing.
Q5-2
Check the printer settings. (→ Setup Guide)
A5-2 In handling, if [LIFESIZE] is selected and a large value is set for the Margin ratio, a large portion of the
image may be cut away. Redo the settings.
Can an image that has already been output be sent to another destination?
Q5-3
A5-3 If the study is displayed in the Study List (→ page 53), the image can be resent after it is loaded.
– 127 –
11. Questions and Answers