Alert - Canon CXDI-1 Operation Manual

10.2 Alert

Error
Code
System Info Error
-4
Driver info is updated.
If there is the trouble of sensor, the sensor power unit may not be supplied.
System Info Error
-5
Capture device info is updated.
If there is the trouble of sensor, the sensor power unit may not be supplied.
System Info Error
-6
A/D board info is updated.
If there is the trouble of sensor, the sensor power unit may not be supplied.
System Info Error
-7
LANMIT info is updated.
If there is the trouble of sensor, the sensor power unit may not be supplied.
System Self Check Error: (Contents)
-8
Call a service engineer and let him/her know the error code.
Capture Board Error
-115
Detected Capture Board Error.
Sensor Unit: Self Check Error
-116
Detected an Error.
Image Error
An error occurred in the image. Call a service person. Check the image in the
-119
Preview-screen and also in the high-resolution monitor or by using [MAG.] or
[QA-MAG.] in the QA screen. Also, turn the power box off and on again to
restart the CXDI.
Internal Storage Limit Warning:
-546 The amount of available internal storage space has dropped below (current
settings). Images currently in storage commitment or that failed in storage
commitment will be automatically deleted.
Internal Storage Limit Warning:
-547
The amount of available internal storage space has dropped below (current
settings). Check the contents of the study list.
OPU-CCR RPC Error
-5002
OPU-CCR RPC Error.
OPU-CCR RPC Error
-6001
Operation has been canceled.
Error Message (Upper box: Error type
Lower box: Error description)
10. Before Calling a Service Engineer
– 113 –
Remedy
Touch [OK] to close the window, and then see
1.2 Shutting Down the CXDI (→ page 5),
and turn off the CXDI.
When these errors occur, note the error code
and contact a Canon representative or
distributor.
Touch [OK] to close the window.
Perform operations according to the messages
displayed.
Note the error code and contact a Canon
representative or distributor.
Touch [OK] to close the window.
Touch [OK] to close the window and then see
6.4 Deleting the Image(s) (→ page 58), and
delete the image.
Touch [OK] to close the window, and then see
1.2 Shutting Down the CXDI (→ page 5),
and turn off the CXDI.
When these errors occur, note the error code
and contact a Canon representative or
distributor.