Self Test Using The Sensor Unit With A Grid Unit Which Cannot Be Removed (Cxdi-40G Compact) - Canon CXDI-1 Operation Manual

9. Self test
9.2 Self test using the sensor unit with a grid unit which
cannot be removed (CXDI-40G COMPACT)
Take the following steps for the self test using the CXDI-40G COMPACT.
Steps which are not described here are the same as for a sensor unit with a removable grid unit.
Refer to the steps described in 9.1 Self test using a sensor unit with a removable grid unit
(see page 103).
1
Display the Self Test Screen.
From the exposure screen, touch [SYSTEM] > [SELF TEST].
2
Start the self test.
Without removing the grid, touch [TEST START].
Although the exposure parameters for the self test can be changed, as a basic rule, their
optimal values were set by the service technician at the time when the product was
installed.
Simply go ahead and perform the self test.
Self Test Screen
– 106 –