Canon CXDI-1 Operation Manual page 45

Selecting an image
Touch the preview image button to display the preview image screen.
The preview image buttons have the following functions.
Button
or
or
To change a series description
Touch the frame to display the software keyboard and enter the series description in 63
or fewer alphanumeric characters.
A series description can be entered for each image.
If an image is retaken after changing the series description, the description registered in
the exposure mode will be used.
AEC (Automatic Exposure Control) area
The AEC (→ Setup Guide) setting range can be displayed on the preview image
screen if the setup has been performed by the service engineer.
When the AEC display is enabled, [Disp. AEC] will appear on the preview image
screen. The setting range indication (yellow frames on the image) can be made to
appear and disappear by touching this button.
If the optional generator communication module has been used, the effective area will
be displayed as yellow squares according to the data sent from the x-ray generator.
4. Browsing Images (Preview Image Screen)
The previous or the next image will be displayed.
The first or the last image will be displayed.
– 37 –
Description