Exposure Screen Display - Canon CXDI-1 Operation Manual

1. Starting Up/Shutting Down the CXDI

1.1.3 Exposure Screen Display

There are two types of exposure screen: tray type and category type. The exposure screen can
be switched depending on the setting (→ Setup Guide).
The tray type screen displays the exposure modes that you use most frequently, and the
category type screen displays all available exposure modes for each area to be imaged.
(An example screen shot is shown below. Note that some items may not appear depending on
the user settings and other conditions.)
Exposure condition parameters (*3)
Patient data area
PATIENT button
SYSTEM button
Study description
button
Image display area
(Density adjustment
area)
Sensor unit button
Exposure modes
on a "tray"
Exposure conditions parameters (*3)
Patient data area
PATIENT button
SYSTEM button
Study description
button
Category tabs
Sensor unit button
Logout (*2)
Tab scroll button
*1 A unique ID issued by the CXDI system ("S:xxx..." and/or "I:yyy...") is displayed in
the message area.
*2 Depending on the installation setup, it may not be displayed.
*3 Bucky msec (bucky time) is displayed only with sensor units CXDI-11, CXDI-12 and
CXDI-22.
*4 The progress bars are displayed when using a sensor unit which has a direct
Ethernet connection to a PC.
Progress bar (*4)
Tray Type Screen
Progress bar (*4)
Category Type Screen
– 4 –
Message area (*1)
Output indicator
[ERR] (Error button)
CHANGE button
Preview image
buttons
MULTI VIEW button
Sending images
after exposure
DESTI. PREF.
button
Present date
and time
Message area (*1)
Output indicator
[ERR] (Error button)
CHANGE button
Preview image
buttons
MULTI VIEW button
Sending images
after exposure
DESTI. PREF. button
Exposure modes
on a "tray"
Present date
and time