Charcoal filter replacement
indicator
The appliance is not supplied with
filters with holder KKF-FF (Active
AirClean). These are available to
purchase separately (see "Optional
accessories").
After fitting charcoal filters, the charcoal
filter replacement indicator has to be
activated.
You will be reminded to replace the
filters after approx. 6 months (see
"Cleaning and Care - Replacing the
charcoal filters"). The symbol will
light up in the display.
After replacing the charcoal filter(s), the
counter must be reset. The indicator will
then go out.
Activating the charcoal filter
replacement indicator or resetting
the counter
Touch the settings sensor.
All symbols available for selection will
appear in the display and the
symbol flashes.
Touch the sensors for setting the
temperature ( or ) repeatedly until
the symbol flashes in the display.
Further settings
Touch the OK sensor to confirm your
selection.
The last selected setting flashes in the
display and the symbol lights up.
Touch or to make your selection:
: Charcoal replacement indicator
deactivated
1: Charcoal replacement indicator
activated
2: Counter reset
Touch the OK sensor to confirm your
selection.
The selected setting is saved and the
symbol flashes.
Touch the settings sensor to leave
settings mode.
Otherwise, the appliance electronics
will exit settings mode automatically
after approximately one minute.
37