Table of Contents
Advertisement
Selecting further settings
Swipe left or right until is shown in
the middle.
Tap .
After Demo mode has been switched
off, the refrigeration appliance shuts
down and must be switched on again.
Resetting the settings to their default
settings
All settings made on the refrigeration
appliance will be reset to default
settings (for settings, see "Guide to the
appliance").
Tap .
Swipe left or right until is shown in
the middle.
Tap .
will appear on the display.
Tap OK.
The refrigeration appliance shuts down
and must be switched on again.
Information
Appliance data (model identifier and
serial number) is shown on the display.
Keep this appliance data to hand:
- For integrating the refrigeration
appliance into your WiFi network (see
"Selecting further settings –
Miele@home") (depending on the
model).
- When reporting an appliance fault to
the Miele Customer Service
Department (see "Service").
- When retrieving information from the
EPREL database (see "Service").
50
Charcoal filter change indicator
After inserting the charcoal filter
(optional accessory), you must activate
the charcoal filter change indicator in
Settings mode .
The charcoal filter change indicator
on the start display will remind you to
replace the charcoal filter approx.
every 6 months (see "Cleaning and
care – Replacing the charcoal filters").
Cleaning mode
Cleaning mode makes it easier to
clean the fridge zone (see "Cleaning
and care"). The interior lighting
remains switched on, even though the
fridge zone is switched off. The buzzer
will stop and the symbols on the
display will also go out.
If Cleaning mode is switched on,
this will be indicated on the start
display.
After cleaning, Cleaning mode must
be switched off. If the appliance door is
closed for more than 10 minutes,
Cleaning mode switches itself off
automatically.
Advertisement
Table of Contents
