Adjusting The Display Brightness; Switching Off Demo Mode; Resetting The Settings To Their Default Settings; Information - Miele KS 4783 ED edt/cs Operating Instructions Manual

Selecting further settings
Adjusting the display brightness 
You can adjust the display brightness to
suit the lighting conditions in the room.
 In Settings mode , use the  or
 sensor control to scroll to the
 symbol.
 Touch OK.
 Use the  and  sensor controls to
select the display brightness you
want.
 Touch OK.
Switching off demo mode 
Demo mode  allows the refrigeration
appliance to be presented by dealers
without the cooling system being
switched on. This setting is not needed
for domestic use.
If demo mode has been switched on
as a default setting,  will show on the
display when the refrigeration
appliance is switched on.
 Touch the OK sensor control on the
control panel.
Miele will appear initially in the display,
followed by the start screen.
 Touch OK.
 In Settings mode , use the  or
 sensor control to scroll to the
 symbol.
 Touch OK.
After demo mode  has been switched
off, the refrigeration appliance switches
off and must be switched on again.
50
Resetting the settings to their default
settings 
All settings made on the refrigeration
appliance will be reset to default
settings (for settings, see "Guide to the
appliance").
 In Settings mode , use the  or
 sensor control to scroll to the
 symbol.
 Touch OK.
 Use the  sensor control to scroll to
the  symbol.
 Touch OK.
The refrigeration appliance switches off
and must be switched on again.
Information 
Appliance data (model identifier and
serial number) is shown on the display.
Keep this appliance data to hand:
- For integrating the refrigeration
appliance into your WiFi network (see
"Selecting further settings –
Miele@home").
- When reporting an appliance fault to
your Miele dealer (see "Service").
Charcoal filter change indicator 
After inserting the charcoal filter
(optional accessory), you must activate
the charcoal filter change indicator  in
Settings mode .
The charcoal filter change indicator 
on the start display will remind you to
replace the charcoal filter approx.
every 6 months (see "Cleaning and
care – Replacing the charcoal filters").