Temperature And Door Alarm; Temperature Alarm; Switching The Temperature Alarm Off Early - Miele KFNS 37432 iD Operating And Installation Instructions

Temperature and door alarm

The appliance has been fitted with a
warning system which ensures that the
temperature in the freezer zone cannot
rise unnoticed and to avoid energy
being wasted if a door is left open.

Temperature alarm

If the freezer section temperature
becomes too warm, the sensor for the
freezer section flashes and the alarm
symbol  in the display will flash
simultaneously. An alarm will also
sound.
The temperature the appliance is set at
determines the temperature the
appliance recognises as being too
warm.
Audible and visual signals will be
activated,
– when the appliance is switched on
and the temperature in a temperature
zone differs greatly from the set
temperature,
– if a lot of room air enters the freezer
when food is being loaded,
rearranged or taken out.
– when freezing large amounts of food
at once,
– when you freeze fresh food that is still
warm,
– in the event of a power cut,
– if the appliance has a fault.
Once the set temperature has been
reached in the freezer section, the alarm
switches off and the alarm symbol 
goes out. The sensor for the freezer
section lights up constantly again.
30

If the temperature in the freezer
remains above -18 °C for a long
time, check that the frozen food has
not started to defrost.
If it has, check that the food is safe
to use and if it is, then use it as soon
as possible or cook it before freezing
it again.
Switching the temperature alarm off
early
If the noise of the alarm disturbs you,
you can switch the alarm off early if you
wish.
 Touch the alarm off sensor.
The alarm will stop.
The freezer section sensor on the
control panel and the alarm symbol 
will continue to flash until the
temperature is at the correct level.